Dell Precision 7820 - Page 74

Option Description
SATA Operation
7820 Tower Allows you to congure the operating mode of the integrated SATA
hard-drive controller.
Click one of the following options:
• Disabled
• AHCI
• RAID On—Default
NOTE: SATA is congured to support RAID
mode.
Drives
7820 Tower Allows you to enable or disable various drives on board.
The options are:
• MiniSAS PCIe SSD-0
• SATA-0
• SATA–2
• SATA–4
• ODD–0
• MiniSAS PCIe SSD-1
• SATA–1
• SATA–3
• SATA–5
• ODD–1
All the options are set by default.
PCIe Drives
Allows the enabling of Front PCIe attached Ports.
• MiniSAS PCIe SSD-0
• MiniSAS PCIe SSD-1
• MiniSAS PCIe SSD-2
• MiniSAS PCIe SSD-3
All the options are set by default.
SMART Reporting
This eld controls if the hard drive errors for the integrated drives
are reported during system startup. This technology is part of the
SMART(Self-Monitoring Analysis and Reporting Technology)
specication.
• Enable SMART Reporting
This option is not set by default.
USB Conguration
Allows you to enable or disable the internal USB conguration.
The options are:
• Enable USB Boot Support
• Enable Front USB Ports
• Enable Internal USB Ports
• Enable USB 3.0 Controller
• Enable Rear USB Ports
74 System Setup