Dell S2722DZ - Connecting Your Monitor; HDMI and DP Cable Connection

Setting up the monitor | 33
Connecting your monitor
WARNING: Before you begin working on the following steps follow the
Safety instructions.
To connect your monitor to the computer:
1. Turn o your computer.
2. Connect the HDMI, or DisplayPort, and the USB-C cable from your monitor to
the computer.
3. Turn on your monitor.
4
. Select the correct input source from the OSD Menu on your monitor and then
turn on your computer.
NOTE: S2422HZ/S2722DZ default setting is DisplayPort 1.2. A DisplayPort
1.1 Graphic card may not display normally.
Connecting the HDMI cable (optional purchase)
HDMI
HDMI
Connecting the DP cable (optional purchase)
DP
DP