Operating your monitor │ 51
OSD warning messages
When the monitor does not support a particular resolution mode, the following
message is displayed:
The current input timing is not supported by the monitor display.
Please change your input timing to 3440x1440, 100Hz or any other
monitor listed timing as per the monitor specications.
Dell 34 Monitor
This means that the monitor cannot synchronize with the signal that it is receiving
from the computer. See Monitor specifications for the Horizontal and Vertical
frequency ranges addressable by this monitor. Recommended mode is 3440 x
1440.
Before the DDC/CI function is disabled, the following message is displayed:
The function of adjusting display setting using PC application will be
disabled.
Do you wish to disable DDC/CI function?
Yes
No
Dell 34 Monitor
S3423DWC
When the monitor enters the Standby Mode, the following message is displayed:
Dell
P2418HZ
Dell 34 Monitor
Going into Standby Mode.
S3423DWC
To Next Page
Loading...
