Dell S3423DWC - Key Product Features

About your monitor │ 9
Product features
The Dell S3423DWC monitor has an active matrix, Thin-Film Transistor (TFT),
Liquid Crystal Display (LCD), anti-static, and LED backlight. The monitor features
include:
•
86.42 cm (34.0 in.) viewable area display (measured diagonally).
•
3440 x 1440 resolution, with full-screen support for lower resolutions.
•
Compatible with (AMD FreeSync), high refresh rates, and a rapid response time
of 4 ms.
•
Supports 48 Hz to 100 Hz (HDMI) and 48 Hz to 100 Hz (USB-C Alternate mode
with DisplayPort 1.4) in Freesync Mode.
•
Built-in Speaker (5 W) x 2.
•
Color gamut of 99% sRGB.
•
Supports both Picture by Picture (PBP) / Picture in Picture (PIP) Select Mode.
•
Digital connectivity with USB-C and HDMI.
•
Single USB-C to supply power (PD 65W) to a compatible notebook while
receiving video and data signal.
•
Equipped with 1 USB-C upstream port, 1 Type B upstream port, 1 super speed
USB 5 Gbps (USB 3.2 Gen 1) Type-A downstream port, and 1 super speed USB 5
Gbps (USB 3.2 Gen 1 with BC1.2) Type-A downstream port.
•
The built-in KVM switch allows you to control up to 2 computers from a single
set of keyboard and mouse connected to the monitor.
•
Supports Auto KVM for multiple input setup.
•
Enables user to switch USB KVM function in PBP mode.
•
Plug-and-play capability if supported by your computer.
•
On-Screen Display (OSD) adjustments for ease of setup and screen optimization.
•
Removable stand and Video Electronics Standards Association (VESA) 100 mm
mounting holes for flexible mounting solutions.
•
Tilt and height adjustment capabilities.
•
Security-lock slot.
•
≤0.3 W in the Standby Mode
•
Dell Display Manager Software included.
•
Uses Low Blue Light panel and is compliant with TUV Rheinland (Hardware
Solution) at factory reset/default setting model (Preset mode: Standard).
•
Optimize eye comfort with a flicker-free screen.