Operating your monitor │ 53
Dell
P2418HZ
Dell 34 Monitor
No USB-C Cable
The display will go into Standby Mode in 4 minutes.
www.dell.com/S3423DWC
?
S3423DWC
The OSD functions only in the normal operation mode. When any button is pressed
in the Active-off mode, the following message is displayed:
Dell
P2418HZ
Dell 34 Monitor
S3423DWC
Press any key on the keyboard or move the mouse to wake it up.
If there is no display, press the monitor button again to select
the correct input source.
?
No HDMI 1 signal from your device.
Activate the computer and the monitor to gain access to the OSD.
See Troubleshooting for more information.
To Next Page
Loading...
