Dell Studio 1435 - Software Features


3. Replace the base cover (see Replacing the Base Cover).

4. Slide the battery into the battery bay until it clicks into place or connect the AC adapter to your computer and an electrical outlet.

5. Turn on the computer.
As the computer boots, it detects the additional memory and automatically updates the system configuration information.
To confirm the amount of memory installed in the computer, click Start ® Help and Support® Dell System Information.
Back to Contents Page

1
tab
2
notch
NOTICE: If the cover is difficult to close, remove the module and reinstall it. Forcing the cover to close may damage your computer.