Dell Studio Hybrid - Page 35

System Date
Displays current date in the mm:dd:yy format.
System Time
Displays the time in the hh:mm:ss format.
SATA 0
Displays the SATA 0 drive integrated in the system.
SATA 1
Displays the SATA 1 drive integrated in the system.
System Info
Displays the BIOS version number and date, system
model name and the service tag of the computer.
Memory Info
Indicates amount of installed memory, usable
memory, memory speed, memory channel mode (dual
or single), and the type of memory technology used.

Advanced
CPU Type
Displays the processor type.
CPU Speed
Displays the processor speed.
Cache L2
Displays the processor L2 cache size.
Advanced Chipset Features
Displays the video memory size.
Integrated Peripherals
Allows you to enable or disable these integrated
devices: HD Audio, Onboard LAN connector,
Onboard LAN Boot ROM, and Side logo. Serial ATA
Configuration can be set to IDE or AHCI mode.
CPU Configuration
Allows you to enable or disable the CPU features that
enhance the performance of the system.
USB Configuration
Allows you to enable or disable the USB controller.

Power
Power Management Setup

ACPI Suspend Type
Specifies the ACPI suspend type. The default is S3.
Auto Power On
Allows you to enable or disable an alarm to turn on
the computer automatically.
AC Recovery
Specifies the behaviour of the system after
recovering from a power loss.
¡ Power on — The computer turns on
after it recovers from a power failure.
¡ Power off — The computer remains
powered off.
¡ Last state— The computer returns the
power state it was in before the power
failure.
HDD Acoustic Mode
Determines the acoustic mode at which the hard
drive operates.
Bypass — Do nothing (needed for older drives).
Quiet — The hard drive operates at its most quiet
setting.
Performance — The hard drive operates at its
maximum speed.

NOTE: Switching to performance mode may cause an
increase in noise produced by the drive, but does not
affect the drive's performance.

Boot
Boot Device Priority
Sets the boot priority among the available devices.
Hard Disk Boot Priority
Sets the hard drive boot priority. The items displayed
are dynamically updated according to the hard drives
detected.
CD/DVD Boot Priority
Sets the optical drive boot priority. The items
displayed are dynamically updated according to the
optical drives detected.
Boot Settings Configuration
Allows the BIOS to skip certain tests while booting.
This decreases the time needed to boot the system.
Security
Allows you to set or change the supervisor password.
