9. On your printer operator panel, use the left or right arrow button to scroll to Setup, and then press the
Select button .
10. Use the left or right arrow button to scroll to Network Setup, and then press the Select button .
11. Use the left or right arrow button to scroll to Wi-Fi Protected Setup, and then press the Select button
.
12. Use the left or right arrow button to scroll to PIN, and then press the Select button .
13. Press the Select button to continue.
14. Type the PIN provided on your printer operator panel into the PIN field on your router WPS page within two
minutes. Wait for configuration to complete.
If setup is successful
Wi-Fi Protected Setup Successful appears on the printer operator panel.
Check if the printer's Wi-Fi LED turns blue. For more information, see
Wi-Fi LED. Continue with step 15.
If setup is unsuccessful or times out
Wait for a few minutes, and then perform
step 9 to step 14 again.
15. Close the router WPS page.
16. Follow the instructions on the installation screen to complete setup.
To Next Page
Loading...
