Disassembly and reassembly
Recommended tools
The procedures in this document require the following tools:
● Phillips #0 screwdriver
● Phillips #1 screwdriver
● Small plastic scribe
Removing the back cover
Steps
1. Follow the procedures in Before working inside your computer.
2. Remove the screws that secure the back cover to the computer.
3. To remove the back cover:
a. Using a scribe, pry the edges of the back cover from all sides [1].
b. Lift the back cover from the computer [2].
3
12 Disassembly and reassembly
To Next Page
Loading...
