Removing the camera
Steps
1. Follow the procedure in Before working inside your computer.
2. Remove the :
a. back cover
b. battery
c. LED board
d. WLAN card
e. system fan
f. display assembly
g. display bezel
3. To remove the camera:
a. Disconnect the camera connector cable [1].
b. Lift to remove the camera from the computer [2].
Installing the camera
Steps
1. Align the camera to its slot on the display panel.
2. Connect the camera cable to its connector on the display panel.
3. Install the:
a. display bezel
b. display assembly
c. system fan
d. WLAN card
e. LED board
40
Disassembly and reassembly
To Next Page
Loading...
