Installing the hard drive bracket
Steps
1. Place the hard drive bracket to align with the holes on the hard drive.
2. Install the screws that secure the hard drive bracket.
3. Install the:
a. hard-drive cable
b. hard drive
c. battery
d. back cover
4. Follow the procedure in After working inside your computer
Removing the WLAN card
Steps
1. Follow the procedures in Before working inside your computer.
2. Remove the:
a. back cover
b. battery
3. To remove the WLAN card:
a. Remove the screw that secures the WLAN card to the computer and lift the plastic tab [1] [2].
b. Disconnect the antenna cables from the WLAN card [3].
c. Remove the WLAN card from the slot on the system board [4].
Disassembly and reassembly
21
To Next Page
Loading...
