Installing the hard drive cable
Steps
1. Connect the hard drive cable to the hard drive.
2. Install the:
a. hard drive
b. battery
c. back cover
3. Follow the procedure in After working inside your computer
Removing the hard drive bracket
Steps
1. Follow the procedure in Before working inside your computer.
2. Remove the:
a. back cover
b. battery
c. hard drive
d. hard-drive cable
3. To remove the hard-drive bracket:
a. Remove the screws that secure the hard-drive bracket to the hard drive.
b. Lift and remove the hard-drive bracket.
20
Disassembly and reassembly
To Next Page
Loading...
