Installing the WLAN card
Steps
1. Insert the WLAN card into the connector at a 45–degree angle.
2. Close the plastic cover over the WLAN card.
3. Tighten the screw to secure the WLAN card to the computer.
4. Connect the antenna cables to the connectors marked on the WLAN card.
5. Install the:
a. battery.
b. back cover.
6. Follow the procedure in After working inside your computer
Removing the coin cell battery
Steps
1. Follow the procedure in Before working inside your computer.
2. Remove the:
a. back cover
b. battery
3. To remove the coin cell battery:
a. Pry the coin cell battery upwards from its slot using a scribe [1] .
22
Disassembly and reassembly
To Next Page
Loading...
