CAUTION: The front-bezel door opens only to a limited extent. See the printed label for the
maximum permissible level.
Removing the Hard-Drive Assembly
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove the:
• cover
• bezel
3. Perform the following steps to remove the hard-drive assembly from the computer:
a. Remove the screw that secures the hard-drive assembly to the front-bezel door [1].
b. Disconnect the hard-drive assembly cables from the connectors on the hard-drive assembly [2,
3].
c. Open the front-bezel door [4].
d. Hold the metal tab on both the sides and pull the hard-drive assembly to remove it from the
computer.
10
To Next Page
Loading...
