Default: Not Set
Asset Tag Allows you to enter your service tag.
Admin Password Allows you to create an admin password.
HDD Password Allows you to create an HDD password.
System Password Allows you to create a system password.
Password Change Allows you to set the option to change password.
Default: Permitted
Firmware TPM Allows you to enable or disable the Firmware TPM.
Default: Disabled
HDD Protection Allows to modify the HDD protection feature.
Default: Disabled
Table 7. — Boot
Boot List Option Displays the boot modes
Default: UEFI
File Browser Add Boot Option and File Browser Del
Boot Option are actiavted
Secure Boot Allows you to enable or disable the Secure Boot
control.
Default: Enabled
Legacy Option ROMs Allows you to load the legacy option ROMs.
Default: Disabled
Boot Option Priorities Enables you to change the boot option priorities.
Table 8. — Exit
Save Changes and Reset Allows to save or rest the changes made to the
system setup.
1. Allows you to discard the changes made to
the system setup.
2. Allows you to restore the system setup
options to default.
3. Allows you to discard the changes made to
the system setup.
4. Allows you to save the changes made to the
system setup.
System Setup Overview
System Setup allows you to:
31