2
Removing and Installing Components
This section provides detailed information on how to remove or install the components from your
computer.
Recommended Tools
The procedures in this document may require the following tools:
• Small flat-blade screwdriver
• Phillips screwdriver
• Small plastic scribe
Removing the Cover
1. Follow the procedures in Before Working Inside Your Computer.
2. Perform the following steps to remove the cover from the computer:
a. Remove the screws that secure the cover to the computer.
b. Slide and lift the cover to remove from the computer.
Installing the Cover
1. Place the cover on the computer and slide to install the cover.
2. Tighten the screws to secure the cover to the computer.
8
To Next Page
Loading...
