Dell Vostro 3650 - Expansion Card Removal and Installation

4. Perform the following steps to remove the memory from the system board:
a. Press down the memory-retention tabs on both sides of the memory module.
b. Remove the memory from the memory-module connector on the system board.
Installing the Memory
1. Align the notch on the memory card with the tab in the memory connector.
2. Insert the memory module into the memory socket.
3. Press down on the memory module until the memory-retention tabs secure the memory in place.
4. Close the front-bezel door.
5. Install the:
a. cover
b. bezel
6. Follow the procedures in After Working Inside Your Computer.
Removing the Expansion Card
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove the:
• cover
• bezel
3. Open the front-bezel door.
4. Perform the following steps to remove the expansion card from the computer:
a. Pull the metal tab to release the expansion card.
b. Slide the tab [2] and remove the expansion card from the connector on the computer [3].
14