3. Follow the procedures in After Working Inside Your Computer.
Removing the Bezel
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove the cover.
3. Perform the following steps to remove the front bezel from the computer:
a. Pry the tabs to release the front bezel from the computer.
b. Remove the front bezel from the computer.
Installing the Bezel
1. Insert the bezel on the computer aligning it to the placeholders.
2. Press the bezel until the hooks snap in to place.
3. Install the cover.
4. Follow the procedures in After Working Inside Your Computer.
Opening the Front-Bezel Door
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove the:
• cover
• bezel
3. Pull to open the front-bezel door.
9