How to fix Flash corruption detected by SBIOS on Dell Desktop?
If your Dell Desktop displays a Flash corruption detected by SBIOS, press the power button for over 25 seconds to do an RTC reset. If the issue continues, replace the system board. Also, disconnect all power sources (AC, battery, coin cell) and drain flea power by pressing and holding down the power button for 3~5 seconds to ensure all power is drained.
What to do if invalid memory installed on Dell Desktop?
If your Dell Desktop has invalid memory installed, try resetting and swapping the memory modules among the slots. If the problem persists, the memory module may need to be replaced.
What to do for memory/RAM failure on Dell Desktop?
If your Dell Desktop experiences a memory/RAM failure, try resetting and swapping the memory modules among the slots. If the problem persists, the memory module may need to be replaced.
What to do if CPU failure occurs on Dell Desktop?
If your Dell Desktop is experiencing a CPU failure, run the Dell SupportAssist/Dell Diagnostics tool. If the problem persists after running the diagnostic tool, consider replacing the system board.
How to fix system board failure on Dell W31C Desktop?
If your Dell Desktop indicates a system board failure, including BIOS corruption or ROM error, first flash the latest BIOS version. If the issue continues, the system board may need to be replaced.
To Next Page
General