42 Cards
NOTICE: To connect a network cable, first plug the cable into the network port or
device and then plug the cable into the computer.
9
If present, lower the card-retention device that lies over the installed cards
and snap it into place.
10
Replace the computer cover (see "Replacing the Computer Cover" on
page 119).
11
Connect your computer and devices to electrical outlets, and then turn
them on.
1 graphics card bridge (not present
on some dual-graphics card
configurations)
2 power connectors (2)
3 dual-PCI Express graphics cards
1
3
2
book.book Page 42 Monday, January 7, 2008 2:53 PM
To Next Page
Loading...
