Memory 25
Memory
You can increase your computer memory by installing memory modules on 
the system board.
Your computer supports DDR2 memory. For additional information on the 
type of memory supported by your computer, see "Specifications" in the 
Owner’s Manual.
DDR2 Memory Overview
• DDR2 memory modules should be installed in 
pairs of matched memory 
size and speed
. If the DDR2 memory modules are not installed in matched 
pairs, the computer will continue to operate, but with a slight reduction in 
performance. See the label on the upper-right or upper-left corner of the 
module to determine the module’s capacity.
  NOTE: Always install DDR2 memory modules in the order indicated on the 
system board.
The recommended memory configurations are:
– A pair of matched memory modules installed in DIMM connectors 1 
and 2
or
– A pair of matched memory modules installed in DIMM connectors 1 
and 2 and another matched pair installed in DIMM connectors 3 and 4
book.book  Page 25  Monday, January 7, 2008  2:53 PM