Lights 105
Lights
CAUTION: Before you begin any of the procedures in this section, follow the
safety instructions in the Product Information Guide
Removing the Front LED Board
NOTE: The front LED board is embedded on the front panel. To remove the front
LED board, you must remove the front panel.
1
Follow the procedures in "Before You Begin" on page 9.
2
Remove the computer cover (see "Removing the Computer Cover" on
page 13).
3
Remove the drive panel (see "Removing the Drive Panel" on page 53).
4
Release the four tabs that secure the front panel to the chassis.
5
Carefully, pivot the front panel away from the computer to release it from
the chassis.
book.book Page 105 Monday, January 7, 2008 2:53 PM
To Next Page
Loading...
