76 Fans
Installing the Hard Drive Fan
NOTICE: Ensure that the hard drive fan cable is correctly routed through the
opening in the lower-right corner of the fan cage.
1
With the hard drive fan cable oriented downward, align the rubber
grommets in the fan with the openings in each corner of the fan cage, then
pull the grommets through until they snap into place.
NOTE: Airflow direction and orientation are shown on the side of the fan.
2
Insert the tab along the bottom of the hard drive fan cage into the
corresponding slot on the chassis, then slide the hard drive fan cage behind
the hard drive bays until it snaps into place.
1 hard drive fan 2 rubber grommets
3 hard drive fan cage 4 hard drive fan orientation direction arrow
5 air-flow direction arrow 6 hard drive fan cable
2
1
3
6
4
5
book.book Page 76 Monday, January 7, 2008 2:53 PM
To Next Page
Loading...
