Fans 77
3
Connect the hard drive fan cable to the FAN_HDD connector on the
master I/O board (see "Power Supply Unit (PSU) DC Connector Pin
Assignments" on page 18).
4
Replace the card fan cage (see "Installing the Card Fan" on page 71).
5
Replace the computer cover (see "Replacing the Computer Cover" on
page 119).
NOTICE: To connect a network cable, first plug the cable into the network port or
device and then plug it into your computer.
6
Connect your computer and devices to electrical outlets, and then turn
them on.
1 hard drive fan 2 hard drive fan cage
2
1
book.book Page 77 Monday, January 7, 2008 2:53 PM
To Next Page
Loading...
