88 System Board
8
Carefully, lift the system board out of the computer.
Installing the System Board
NOTICE: If you are replacing the system board, visually compare the replacement
system board to the existing system board to make sure that you have the correct
part.
NOTE: Some components and connectors on replacement system boards may be
in different locations than corresponding connectors on the existing system board.
NOTE: Jumper settings on replacement system boards are preset at the factory.
1
Transfer components from the existing system board to the replacement
system board, if applicable.
1 screw (10)
1
book.book Page 88 Monday, January 7, 2008 2:53 PM
To Next Page
Loading...
