52 Drives
8
Replace the computer cover (see "Replacing the Computer Cover" on
page 119).
NOTICE: To connect a network cable, first plug the cable into the network port or
device and then plug it into the computer.
9
Connect your computer and devices to electrical outlets, and then turn
them on.
See the documentation that came with the drive for instructions on
installing any software required for drive operation.
1 SATA power cable 2 SATA data cable
3 SATA data connector (on the
system board)
1
2
3
book.book Page 52 Monday, January 7, 2008 2:53 PM
To Next Page
Loading...
