Drives 57
3
Remove the drive panel (see "Removing the Drive Panel" on page 53).
4
Remove the existing floppy drive, if applicable (see "Removing a Floppy
Drive" on page 55).
5
If no screws are attached to the new floppy drive, check the inside of the
drive panel for shoulder screws. If screws are present, attach the screws to
the new drive.
6
Slide the floppy drive into the drive bay until it clicks into place.
1 floppy drive 2 shoulder screws (4)
1
2
book.book Page 57 Monday, January 7, 2008 2:53 PM
To Next Page
Loading...
