Drives 61
3
Remove the drive panel (see "Removing the Drive Panel" on page 53).
4
Remove the existing media card reader, if applicable (see "Removing a
Media Card Reader" on page 59).
5
If no screws are attached to the media card reader, check the inside of the
drive panel for shoulder screws. If screws are present, attach the screws to
the new card reader.
6
Slide the media card reader into the drive bay until it clicks into place.
1 media card reader 2 shoulder screws (4)
1
2
book.book Page 61 Monday, January 7, 2008 2:53 PM
To Next Page
Loading...
