DeLonghi EC9335.M - Page 41

40
LIGHTS ALARM SOLUTION
on
Descaling must be performed Descale the appliance as described in sec-
tion "14. Descaling"
ashing quickly
The dial (B8) is in the descaling position Turn the dial to one of the beverage
positions
+ ashing
The lter holder has been detached be-
fore grinding has ended or pressing has
been performed too quickly
Repeat grinding
The coee mill coee guide is clogged Clean as described in section "13.10
Cleaning the "Smart tamping station""
and section "19. Troubleshooting" in cor-
respondence to g. 50.
The burrs are blocked by foreign matter Remove the foreign matter and clean the
burrs as described in section "13.8 Clean-
ing the burrs".
+ ashing
The appliance is being turned on for the
rst time and the water circuit must be
lled.
Proceed as described in section "3. Set-
ting up the appliance"
If the water softener lter (C6) is present,
an air bubble may have been released in-
side the circuit, obstructing delivery
Press the button (B6) corresponding to
the light (g. 9). Delivery begins
and stops automatically.
The grinding is too ne and the coee is
delivered too slowly or not at all
Extract the lter holder and repeat the
operations to make the coee, bearing
in mind the indications in section "4.5
Adjusting the quantity of ground coee
in the lter" and table "16. How to make
perfect coee".
…
→