EasyManua.ls Logo

DeLonghi EC9335.M - Troubleshooting

DeLonghi EC9335.M
45 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
41
50
LIGHTS ALARM SOLUTION
+ ashing
If the water softener lter (C6) is present,
an air bubble may have been released in-
side the circuit, obstructing delivery
Press the button (B6) corresponding to
the light (g. 9). Delivery begins
and stops automatically.
The grinding is too ne and the coee is
delivered too slowly or not at all
Extract the lter holder and repeat the
operations to make the coee, bearing
in mind the indications in section "4.5
Adjusting the quantity of ground coee
in the lter" and table "16. How to make
perfect coee".
The lter is blocked, or the perforated
lter is missing
Clean as described in section "13.4 Cof-
fee lter cleaning and maintenance" and
make sure the perforated lter is put back
correctly
The tank has been inserted incorrectly
and the valves on the bottom are not
open
Press the tank down lightly to open the
valves on the bottom
Scale in the water circuit Descale as described in section "14.
Descaling"
+ ash briey at regular
intervals
The dial (B2) has been turned to the max-
imum adjustment possible
When not enough coee is ground to
reach the correct quantity, select the new
grinding range as described in section
"12.6 Extra grinding adjustment".
19. TROUBLESHOOTING
PROBLEM CAUSE SOLUTION
No espresso coee is delivered No water in the tank (A17) Fill the tank
The light is on and the
light is ashing to indicate that the cof-
fee or steam circuit is empty.
Press the button corresponding to the
light to ll the circuit.
The lter is blocked, or the perforated
lter is missing
Clean as described in section "13.4 Coee
lter cleaning and maintenance" and make
sure the perforated lter is put back correctly
The tank has been inserted incorrectly
and the valves on the bottom are not
open
Press the tank down lightly to open the
valves on the bottom
Scale in the water circuit Descale as described in section "14.
Descaling"
The lter holder cannot be attached to
the appliance
The ground coee has not been pressed
or is too much
Clean as described in section "4.4 Grind the
coee directly into the lter"

Related product manuals