39
17. EXPLANATION OF LIGHTS
LIGHTS EXPLANATION OF LIGHTS OPERATION
All the lights ash briey Turning the machine on Self-diagnosis
on
Insucient water in tank or water tank
not inserted correctly
Fill the tank or extract the tank and put it
back correctly
Energy saving is enabled See section "12.5 Energy saving" if you want
to disable the function
on
The appliance is on and ready for use The appliance is at the right temperature
to deliver steam. To deliver steam, turn the
steam dial (A4)
ashing
The appliance is on and energy saving
is enabled. The steam dial (A4) is in the
steam delivery position
The light ashes to indicate that the appliance
is preparing to deliver steam. Delivery begins
as soon as the appliance is at temperature
The appliance is heating up to be ready
for use
The appliance is at temperature when the
light remains on steadily
Steam delivery has ended and the
steam dial (A4) is in the steam position
Turn the dial to the ◯ position.
ashing
The lter holder has been detached
from the coee mill without pressing
Detach the lter holder and press the coee
as described in section "7. Using pre-ground
coee"
Pressing is needed The coee has just been ground and the lter
holder is attached to the coee mill
on
Pressing has been performed correctly
on
The beans container is empty Fill the beans container
ashing
The beans container is not inserted or
is not correctly screwed in place, or the
selector on the bottom of the container
is not in a position from 1 to 6.
Put the beans container in the appliance
correctly
ashing
The appliance is too hot to make coee Wait for it to cool
ashing
Descaling is underway Complete the operation as described in sec-
tion "14. Descaling"
Descaling has ended and the dial (B8) is
in the "descaling" position
Turn the mode selector dial to one of the
"coee positions"
18. ALARMS
LIGHTS ALARM SOLUTION
on
General alarm Contact Customer Services
+ ashing
The drip tray (A13) is missing or has not
been inserted correctly
Extract the drip tray then put back cor-
rectly in the appliance
…
→