DELTA DORE TYBOX 1127 - 1. Description; Control Panel Detailed Description; 2. Automatic Mode (AUTO); 3. Override

9
1. Description
2. Automatic mode (AUTO)
Turn the selector dial to AUTO.
Your thermostat will function according to the set programme.
Depending on the conguration during installation, your unit will
continuously display the setpoint temperature or the room temperature
(menu 2-04).
If you are in the programmed Economy period, and the
symbol
ashes and the Comfort setpoint is displayed, it’s because pre-heating
is in progress (see § Pre-heat function).
3. Override
In AUTO mode, you can use the override to change the setpoint temperature until the next programmed point.
Example: it is 15:30 and you would like to switch to
Comfort mode before the set time (17:00).
To cancel the current override, press the buon once more.
A
G
E F
B
C
D
A
Selector dial
B
Programme prole
C
Room
Day (1 = Monday)
Time
Current setpoint
Information
H
Boiler maintenance due
(deadline < 30 days)
O mode
Absence mode
Manual mode
AUTO Follows programming
Date and time seings
PROG Programming
Adjusting
setpoint temperature seings
Comfort
Economy
Frost protection
6h 8h
24h0h
17h 23h
6h 8h 0h0h 17h 23h
15h30
1
2
3
❶ Press
the buon
❷ Override
in progress
❸ At 17:00, the programme will
return to its usual schedule.
USE
H