DELTA DORE TYBOX 1127 - 7.3 Programme Verification; 7.4 Return to Initial Programme

13
7.3 Programme verication
7.4 Return to initial programme
You want to reset to the initial programmes.
Once your programme has been
changed, you can check it by
successively pressing the buon
.
If it suits you, conrm with OK and
go to the next day
(if PROGx7).
To exit the mode, turn the selector
dial.
EXIT
1
2
3
4
5
6
EXIT
❶ Turn the dial to PROG.
❷ Press + or - to display “rES Pr”.
❸ Conrm with OK.
❹ Press + or - to make “YES” ash.
❺ Conrm with OK.
❻ To exit the mode, turn the dial.