DELTA DORE TYBOX BUS OT - 5; Automatic Mode; 6; Timed Comfort Mode

12 13
EN
0h 2 4 6 8 10 12 14 16 18 20 22 24
AUTO
PROG
If there is an extended power failure, the clock must
be checked and set if necessary so as not to oset the
programme management.
0h 2 4 6 8 10 12 14 16
18 20 22 24
AUTO
PROG
AUTO
PROG
0h 2 4 6 8 10 12 14 16 18 20 22 24
AUTO
PROG
AUTO
PROG
AUTO
0h 2 4 6 8 10 12 14 16 18 20 22 24
AUTO
PROG
5°C-> Confort max.
1h00-> 23h00
1 2
3
4
AUTO
PROG
0h 2 4 6 8 10 12 14 16 18 20 22 24
AUTO
PROG
AUTO
PROG
AUTO
0h 2 4 6 8 10 12 14 16 18 20 22 24
AUTO
PROG
5°C-> Confort max.
1h00-> 23h00
1 2
3
4
AUTO
PROG
0h 2 4 6 8 10 12 14 16 18 20 22 24
AUTO
PROG
AUTO
PROG
AUTO
0h 2 4 6 8 10 12 14 16 18 20 22 24
AUTO
PROG
5°C-> Confort max.
1h00-> 23h00
1
2
3
4
AUTO
PROG
0h 2 4 6 8 10 12 14 16 18 20 22 24
AUTO
PROG
AUTO
PROG
AUTO
0h 2 4 6 8 10 12 14 16 18 20 22 24
AUTO
PROG
5°C-> Confort max.
1h00-> 23h00
1
2
3
4
AUTO
PROG
0h 2 4 6 8 10 12 14 16 18 20 22 24
AUTO
PROG
AUTO
PROG
AUTO
0h 2 4 6 8 10 12 14 16 18 20 22 24
AUTO
PROG
5°C-> Confort max.
1h00-> 23h00
1 2
3
4
AUTO
PROG
0h 2 4 6 8 10 12 14 16 18 20 22 24
AUTO
PROG
AUTO
PROG
AUTO
0h 2 4 6 8 10 12 14 16 18 20 22 24
AUTO
PROG
5°C-> Confort max.
1h00-> 23h00
1 2
3
4
5/ AUTOMATIC MODE 6/ ‘TIMED COMFORT’ MODE
Turn the selector knob to AUTO.
In AUTO mode, the thermostat follows the
daily programme.
The segment ashes on the current
me and the or symbol is displayed
depending on the current seng (the
seng value is displayed according to
CF02).
The automac programme can be
temporarily suspended by:
- a 'Timed Comfort' override (C),
- an Absence mode ( ),
The 'Timed comfort' mode temporarily suspends the automac
programme by applying a selected temperature seng over a
programmed period (01:00 to 23:00).
Turn the selector
knob to AUTO and
press the C buon.
Set the required
period.
Conrm with OK.
Set the required
temperature.
Conrm with OK.
Countdown starts. At the end of the countdown, the AUTO mode
and sengs are opened.
To cancel the 'Timed Comfort' mode before the end of the countdown,
press C or change the mode by turning the selector knob.