16 17
EN
: Maintenance required
: Remote reset authorised
: Low water pressure
: Burner fault
: Air pressure fault
: High water temperature
: Refer to the boiler user guide
to determine the meaning of
the fault.
9/ INFORMATION BUTTON
1
2
3
4
5
6
7
Ou
From the Shutdown, Auto, Comfort, Economy and Frost protecon
modes, the Informaon buon (i) is acve and is used to display
the following informaon:
❶ Current temperature seng, or measured temperature if the
previous screen displayed the temperature seng.
❷ Outdoor temperature, if an outdoor sensor is connected to
the boiler),
❸ Required boiler temperature (water ow).
❸ Real boiler temperature (water ow).
❺ DHW temperature, if the DHW is controlled by the thermostat,
see PI 05.
❻ Boiler maintenance counter. To inialise the counter:
- Press C for 5 seconds. The inialisaon screen with the
ashing default value is displayed (CF08 in days).
- Conrm the inialisaon of the counter with OK, or exit
by using the selector knob.
❼ Faults:
Press the i buon to move from one informaon item to another. The
selector knob is used to exit the informaon screen. For temperatures,
'--.-°C' is displayed if there is no informaon.
❻ To inialise
the boiler
maintenance
counter