Chapter 4 Parameters|
Revision Nov. 2008, VLE1, SW V1.03 4-61
05-19 Accumulative Motor Operation Time (Day) Unit: 1
Control
mode
VF VFPG SVC FOCPG TQCPG
Factory setting: 00
Settings 00 to 65535
Pr. 05-18 and Pr.05-19 are used to record the motor operation time. They can be cleared by
setting to 00 and time which is less than 60 seconds will not be recorded.
05-20 Core Loss Compensation Unit: 1
Control
mode
SVC
Factory setting: 10
Settings 0 to 250%
To Next Page
Loading...
