Delta Electronics Network Device VFD-S

Essential safety guidelines and warnings before installing the AC motor drive.

Procedures for checking the AC motor drive upon receipt, including package contents and unit condition.

Explanation of the information provided on the AC drive's nameplate.

Detailed breakdown of the VFD-S series model number components.

Information on different drive frame sizes and their corresponding power ranges.

Visual overview of the AC motor drive's external appearance and model identification.

Step-by-step guide on how to physically install the AC motor drive.

Guidelines for properly storing the AC motor drive to maintain its condition.

Specifies the environmental conditions required for operating and storing the AC motor drive.

Instructions for mounting and installing the AC motor drive, including clearances and heat dissipation.

Provides dimensional drawings and measurements for various AC motor drive models.

General information and applicable codes for wiring the AC motor drive.

Details on basic wiring practices, including safety precautions and terminal connections.

Overview of external wiring components and their functions for AC motor drives.

Explanation of main terminal symbols and their functions for power and motor connections.

Wiring diagrams and terminal functions for controlling the AC motor drive's operation.

Details on main circuit terminal connections, including power terminals and torque specifications.

Checklist of essential items to verify before powering up and starting the AC motor drive.

Describes different methods for operating the AC motor drive, including keypad and external signals.

Procedure for performing a trial run of the AC motor drive after initial checks.

Overview of the digital keypad's components, including keys, display, and LEDs.

Details on the meaning of the LED indicators on the AC motor drive.

Describes common display messages shown on the AC motor drive's digital display.

Guide on navigating and operating the AC motor drive using the digital keypad.

Overview of the parameter groups and a summary of key parameters for easy setting.

Provides parameter settings recommendations for various applications and functions.

Detailed explanations of parameter settings within Group 0: User Parameters.

Lists common fault names, descriptions, and corrective actions for troubleshooting.

Describes the methods for resetting the AC motor drive after a fault has been resolved.

Troubleshooting guide for over-current faults, including possible causes and solutions.

Troubleshooting steps for ground fault issues in the AC motor drive.

Guidance for resolving over-voltage faults in the AC motor drive.

Troubleshooting steps for low-voltage faults and input power issues.

Steps to diagnose and resolve overheating issues in the AC motor drive.

Troubleshooting for overload conditions, including checking settings and load.

Steps to resolve issues with the AC motor drive's keypad display.

Troubleshooting guide for phase loss faults in the AC motor drive.

Diagnostic flowchart for troubleshooting when the motor fails to run.

Troubleshooting steps when the motor speed cannot be adjusted or changed.

Steps to diagnose and resolve issues where the motor stalls during acceleration.

Guidance for troubleshooting when the motor does not operate as expected.

Solutions for mitigating electromagnetic and induction noise affecting the drive.

Precautions regarding environmental conditions for optimal AC motor drive operation.

Information on how AC motor drives can affect other machines and suggested solutions.

Basic checks to perform daily to detect abnormalities during AC motor drive operation.

Scheduled inspection tasks to ensure the AC motor drive's optimal condition and longevity.

Electrical and mechanical specifications for the 115V class AC motor drives.

Electrical and mechanical specifications for the 230V class AC motor drives.

Electrical and mechanical specifications for the 460V class AC motor drives.

Overall technical specifications and characteristics of the AC motor drive series.

Catalog of Delta brake resistors and units, including specifications and model numbers.

Information on Delta EMI filters and their proper installation for noise reduction.

Recommended values and applications for AC reactors used with AC motor drives.

Table of recommended DC choke values based on input voltage, power, and current.

Dimensions and recommended wire size for the Zero Phase Reactor.

Dimensions and screw sizes for the Din Rail Adapter accessory.

Dimensions and programming notes for the RC-01 remote controller accessory.

Dimensions of the conduit bracket accessory for AC motor drive installation.

Chart of recommended non-fuse circuit breakers and fuses for AC motor drives.

Formulas for calculating AC motor drive capacity based on load and motor characteristics.

Important selection and parameter setting precautions for AC motor drives.

Guidance on selecting appropriate motors and precautions for AC motor drive applications.