Need help?Do you have a question about the Delta Electronics VFD-M Series and is the answer not in the manual?
General| Enclosure Rating | IP20 |
|---|---|
| Output Voltage | Matches input voltage |
| Overload Capacity | 150% for 60 seconds |
| Control Mode | V/F control |
| Protection Functions | Overcurrent, Overvoltage, Undervoltage, Overheating, Short Circuit |
| Operating Temperature | -10°C to +50°C |
| Analog Inputs | 2 |
| Communication Interface | RS-485 (Modbus RTU) |
| Storage Temperature | -20°C |
| Humidity | 90% RH, non-condensing |
| Cooling Method | Fan cooled |
Essential safety guidelines and warnings prior to installation and operation.
Procedure for checking the AC motor drive upon receipt.
Guidelines for ambient conditions and mounting clearances for installation.
Physical dimensions and technical specifications of the AC motor drive models.
Schematic illustrating the main and control circuit connections for the AC motor drive.
Explanation of optional external components like reactors, filters, and contactors.
Details on main circuit terminal connections, wire gauge, and torque specifications.
Overview of the digital keypad's display panel and control buttons.
Step-by-step guide on how to operate the digital keypad for setting parameters.
Instructions for performing a trial run of the AC motor drive using the digital keypad.
A comprehensive overview of all configurable parameters and their factory settings.
Recommended parameter settings tailored for specific applications like speed search and multi-step operation.
Detailed explanations and settings for individual parameters, including V/F curves.
Diagnosis and corrective actions for Over Current (OC) and Ground Fault (GFF) errors.
Troubleshooting steps for Over Voltage (OV), Low Voltage (Lv), and motor running problems.
Solutions for Over Heat (OH1), Overload (OL), abnormal keypad display, and phase loss.
List of fault names, descriptions, and corrective actions for error codes.
Guidelines for resetting the drive and performing daily/periodic maintenance checks.
Summary of control system, protection functions, environmental conditions, and approvals.
Table of brake resistors and units with specifications, dimensions, and weights.
Recommended non-fuse circuit breakers and fuse specifications for VFD-M models.
Recommended AC input/output reactors and EMI filter cross-reference.
Dimensions for Din Rail adapters DR01 and DR02 for mounting the drives.
Formulas and calculations for determining the required AC motor drive capacity.
Important considerations and precautions for selecting the appropriate AC motor drive.
Guidance on selecting suitable motors, including standard and special types.
To Next Page