Chapter 4 Parameters|
4-96 Revision Nov. 2008, VLE1, SW V1.03
09-05 Response Delay Time Unit: 0.1
Control
mode
VF VFPG SVC FOCPG TQCPG FOCPM
Factory Setting: 2.0
Settings 0.0 ~ 200.0 ms
This parameter is the response delay time after AC drive receives communication command
as shown in the following.
PC or PLC command
Handling time
of the AC drive
Response Delay Time
Response Message
of the AC Drive
RS-485 BUS
To Next Page
Loading...
