To Next PageTo Next Page
Need help?Do you have a question about the Delta 20-330 and is the answer not in the manual?
General| Type | Scroll Saw |
|---|---|
| Motor | 1.3 Amp |
| Variable Speed | Yes |
| Stroke Length | 3/4 inch |
| Table Tilt | 0° - 45° |
| Cutting Capacity | 2 inches |
| Max Cutting Depth at 90° | 2 inches |
Details specific safety warnings related to Proposition 65.
Details the electrical specifications for the machine's motor.
Provides essential safety instructions for grounding the machine.
Lists the tools necessary for assembling the machine.
Instructions for assembling the machine's stand components.
Details on how to attach the wheel assembly to the stand.
Steps for attaching the vise clamping handwheel.
Procedure for installing the stand handle.
Steps to attach the stock advance stop assembly.
Instructions for assembling the belt and pulley guard.
Guidance on securing the band saw to a stable surface.
How to turn the band saw on and off using the main switch.
Method for securing the switch to prevent unauthorized use.
Explanation of the automatic shut-off mechanism in horizontal mode.
Procedure for setting the correct tension on the saw blade.
How to align the blade to run correctly on the wheels.
Steps to adjust the blade support bearings for optimal performance.
Procedure for adjusting the blade guide bearings.
How to ensure the blade is perpendicular to the table.
How to adjust the guide brackets for workpiece width.
Method for controlling the speed at which material is fed into the blade.
Using and adjusting the vise for cutting operations.
How to set the stock stop for repetitive cuts.
Using the lever for positioning the saw arm.
Procedure for changing blade speeds and setting belt tension.
Describes common cutting tasks performed in horizontal mode.
Describes common cutting tasks performed in vertical mode.
Techniques for cutting curved shapes with the band saw.
Instructions for lubricating the vise lead screw.
Guidance on cleaning the machine and its components.
Troubleshooting steps for when the machine does not start.
Advice on applying paste wax to surfaces.
Method for cleaning and protecting cast iron tables from rust.
Information on obtaining assistance, parts, and warranty support.
Information about available accessories for the machine.
Details of the product's limited warranty terms.
