Delta 210 Series - Water Supply Plumbing; Connecting to Cold Water Supply; Proper Connection Tightening

1
2
3
1/2" IPS
3/8" Compression
Water Supply Connection
Note: Cold water Only
Turn off cold water supply. Install Tee fitting (1) to the cold water supply (swivel end of
Tee to supply line). IMPORTANT: The filter should be connected to the cold water
supply ONLY. Make the kitchen faucet connection using a 1/2" IPS x 3/8" compression
faucet connector (2) (connections for cold and hot water supplies are not supplied). Use
the enclosed 3/8" compression faucet connector (3) for the filter spout connection.
IMPORTANT: When making connections be sure to use two wrenches when
tightening. Do not overtighten.
3
1-800-345-DELTA (3358)
www.deltafaucet.com
8
Swivel End
Water Supply
Shut off Valve