Delta 36-751 User Manual

5
10” Tilting Arbor Saw
SPECIFICATIONS
High quality and feature loaded.
•
Magnetic motor starter with thermal
overload and no-voltage protection.
•
Full cabinet with motor cover
for sawdust containment.
•
Built-in storage for miter
gage, rip fence and blade
wrench.
•
Extra-large cast-iron table with
extension wings provides ample
support for large work.
•
Integral T-slot grooves prevent
miter gage from falling during wide
cut-off operations.
•
Convenient up-front blade raising and
tilting controls for safe, easy operation.
Model 36-755 10Ó Tilting Arbor Saw.
Includes basic machine with Jet-Lock
®
,
Micro-Set
®
rip fence; see-thru blade guard,
splitter and anti-kickback attachment; front
graduated guide bar, rear guide bar, miter
gage, 10Ó dia. saw blade, table insert, arbor
and motor pulleys, V-belt, (2) table extension
wings, motor cover; 2HP, 230V, single phase,
60 Hz., TEFC motor; motor starter and
instruction manual.
Model 36-751 10Ó Tilting Arbor Saw with 30Ó Unifence
®
Saw Guide. Same as Model 36-755 above less Jet-Lock
®
,
Micro-Set
®
rip fence with front and rear guide bars and (1)
table extension wing, but with Unifence
®
Saw Guide which
includes fence, carriage assembly, front guide bar, table
frame, legs and mounting hardware. Less table board.
Model 36-752 10Ó Tilting Arbor Saw with 52Ó Unifence
®
Saw Guide. Same as Model 36-755 above less Jet-Lock
®
,
Micro-Set
®
rip fence with front and rear guide bars and (1)
table extension wing, but with Unifence
®
Saw Guide which
includes fence, carriage assembly, front guide bar, table
frame, legs, shelf support brackets and mounting hardware.
Less table and shelf boards.
Cuts stock 3
1
⁄8Ó thick; a full
2
1
⁄8Ó at 45° blade tilt. 2 HP
motor delivers plenty of power
for fast, efficient cutting.
Unique “table top located”
adjusting screws for accurate
setting of 45° and 90° positive
blade stops.
Motor ........................................... 2 HP, 230V, 60 Hz., single phase
Blade:
Diameter .................................................................... 10Ó (254 mm)
Arbor .............................................................................
5
⁄8Ó (16 mm)
Speed ............................................................................... 4000 rpm
Capacity:
Max. depth of cut 90° ................................................. 3
1
⁄8Ó (79 mm)
Max. depth of cut 45° ................................................. 2
1
⁄8Ó (54 mm)
Max. rip R of blade .................................................... 25Ó (635 mm)
Max. rip L of blade .................................................. 15
1
⁄2Ó (394 mm)
Max. rip R of blade w/30Ó Unifence Saw Guide ........ 30Ó (762 mm)
Max. rip R of blade w/52Ó Unifence Saw Guide ...... 52Ó (1321 mm)
Max. rip L of blade w/30Ó or
52Ó Unifence Saw Guide ....................................... 8
3
⁄4Ó (222 mm)
Table in front of saw blade at
max. cutting height .............................................. 12
1
⁄4Ó (311 mm)
Max. width of dado .....................................................
13
⁄16Ó (21 mm)
Table:
Size w/extension wings .......................... 36Ó x 27Ó (914 x 686 mm)
Size w/ext. wing and 30Ó
Unifence Saw Guide ...................... 62
1
⁄2Ó x 27Ó (1588 x 686 mm)
Size w/ext. wing and 52Ó
Unifence Saw Guide ...................... 78
1
⁄2Ó x 27Ó (1994 x 686 mm)
Height ...................................................................... 34
1
⁄4" (870 mm)
Miter gage groove ........................................
3
⁄8Ó x
3
⁄4Ó (10 x 19 mm)
Overall Dimensions:
Width ....................................................................... 45Ó (1143 mm)
Width w/30Ó Unifence Saw Guide ........................ 67
1
⁄2Ó (1715 mm)
Width w/52Ó Unifence Saw Guide ........................... 83Ó (2108 mm)
Depth ......................................................................... 32Ó (813 mm)
Height ........................................................................ 39Ó (991 mm)
Weight: Model 36-755 ......................................... 288 Ibs. (131 kg)
Model 36-751 ......................................... 290 Ibs. (132 kg)
Model 36-752 ......................................... 293 Ibs. (133 kg)
Model 36-755 10Ó Tilting Arbor Saw
Model 36-752 10Ó Tilting Arbor Saw
with 52Ó Unifence Saw Guide
and 34-998 Accessory Table and
Shelf Boards.
Model 36-751 10Ó Tilting Arbor Saw
with 30Ó Unifence Saw Guide and
34-914 Accessory Table Board.
For accessories, see page 27
®

Delta 36-751 Specifications

General

Type	Table Saw
Blade Diameter	10 inches
Motor	15 Amp
Arbor Size	5/8 inches
Voltage	120 V
Max Rip Left	12 inches
Max Depth of Cut at 90 Degrees	3-1/8 inches
Max Depth of Cut at 45 Degrees	2-1/4 inches
No-Load Speed	5000 RPM
Max Rip Right	30 inches

Summary

10" Tilting Arbor Saw

Model 36-755 10" Tilting Arbor Saw

Basic machine with Jet-Lock, Micro-Set rip fence, and accessories.

Model 36-751 10" Tilting Arbor Saw with 30" Unifence® Saw Guide

Same as 36-755 but with Unifence Saw Guide.

Specifications

Detailed technical specifications for the Tilting Arbor Saw models.

10" Contractor's Saw®

Model 36-444 10" Contractor's Saw®

Basic machine with UniRip fence, stand, and accessories.

Model 36-445 10" Contractor's Saw® with 30" Unifence® Saw Guide

Same as 36-444 but with 30" Unifence Saw Guide.

Specifications

Detailed technical specifications for the Contractor's Saw models.

10" Contractor's Saw®

Model 36-460 10" Contractor's Saw® with 28" Biesemeyer T-Square® Home Shop Saw Fence System

Basic machine with 28" Biesemeyer T-Square fence system.

Model 36-470 10" Contractor's Saw® with 40" Biesemeyer T-Square® Home Shop Saw Fence System

Basic machine with 40" Biesemeyer T-Square fence system.

Specifications

Detailed technical specifications for the Contractor's Saw models with Biesemeyer fences.

10" Contractor's Saw® II

Model 36-630 10" Contractor's Saw® II

Basic machine with Jet-Lock rip fence, guide bars, and accessories.

Model 36-640 10" Contractor's Saw® II with Precision Saw Guide

Same as 36-630 but with Precision Saw Guide.

Specifications

Detailed technical specifications for the Contractor's Saw II models.

10" Table Saw

Model 36-600 10" Table Saw

Basic machine with T-Square rip fence, table insert, and accessories.

Specifications

Detailed technical specifications for the 10" Table Saw.

Sidekick® 81/4" Builder's Saw®

Model 36-275 Sidekick® 81/4" Builder's Saw®

Basic machine with rip fence, miter gage, and accessories.

Specifications

Detailed technical specifications for the Sidekick 81/4" Builder's Saw.

10" Bench Saw

Model 36-540 Type 2 10" Bench Saw

Basic machine with rip fence, miter gage, and accessories.

Model 36-545 10" Bench Saw with Stand

Same as 36-540 but includes a steel stand.

Specifications

Detailed technical specifications for the 10" Bench Saw models.

Sidekick® Saw Stand

Model 50-170 Sidekick® Saw Stand

Stand designed for 81/4" and 10" Bench Saws for job-site mobility.

Specifications

Technical details of the Sidekick Saw Stand.

Deluxe Sawbuck® Frame and Trim Saw

Model 33-055 Deluxe Sawbuck® Frame and Trim Saw

Saw with miter and tilt capabilities for angle and compound cuts.

Specifications

Detailed technical specifications for the Deluxe Sawbuck.

Sidekick® 10" Sliding Compound Miter Saw

Model 36-250 Sidekick® 10" Sliding Compound Miter Saw

Saw with built-in stand, left/right extensions, and wrench storage.

Specifications

Detailed technical specifications for the Sidekick 10" Sliding Compound Miter Saw.

Sidekick® 10" Sliding Compound Miter Saw

Model 36-240 Delta Sidekick 10" Sliding Compound Miter Saw

Saw with patented base, built-in head lock, and dual rod guide system.

Specifications

Detailed technical specifications for the Delta Sidekick 10" Sliding Compound Miter Saw.

Sidekick® 12" Compound Miter Saw

Model 36-235 Sidekick® 12" Compound Miter Saw

Saw with extra-tall fence, improved support, and more features.

Specifications

Detailed technical specifications for the Sidekick 12" Compound Miter Saw.

Sidekick® 10" Compound Miter Saw

Model 36-210 Sidekick® 10" Compound Miter Box

Saw with powerful motor, electric brake, and carbide-tipped blade.

Specifications

Detailed technical specifications for the Sidekick 10" Compound Miter Saw.

Sidekick® 10" Motorized Miter Box

Model 36-090 Sidekick® 10" Motorized Miter Box

Lightweight saw with aluminum alloy construction and efficient dust collection.

Specifications

Detailed technical specifications for the Sidekick 10" Motorized Miter Box.

10" Compound Miter Saw

Model 36-220 10" Compound Miter Saw

Saw with double insulated construction, D-handle design, and automatic retracting guard.

Specifications

Detailed technical specifications for the 10" Compound Miter Saw.

10" Compound Power Miter Saw

Model 36-075 10" Compound Power Miter Saw

High performance saw with easy-to-read bevel scale and positive stops.

Specifications

Detailed technical specifications for the 10" Compound Power Miter Saw.

10" Power Miter Saw

Model 36-070 10" Power Miter Saw

Saw with convenient miter indexing, extra-wide fence, and bench mounting holes.

Specifications

Detailed technical specifications for the 10" Power Miter Saw.

81/4" Compound Miter Saw

Model 36-040 81/4" Compound Miter Saw

Saw with 9 amp motor, positive ball detents, and articulating blade guard.

Specifications

Detailed technical specifications for the 81/4" Compound Miter Saw.

'kickstand Portable Work Stand

No. 50-175 'kickstand Portable Work Stand

Portable stand for miter saws, increasing mobility and performance.

Specifications

Technical details of the 'kickstand Portable Work Stand.

14" Abrasive Cut-Off Saw

Model 20-140 14" Abrasive Cut-Off Saw

Saw for tough metal-cutting jobs with fold-down cutting head and locking chain.

Specifications

Detailed technical specifications for the 14" Abrasive Cut-Off Saw.

12" Radial Saw

Model 33-890 12" Radial Saw with 2 HP Motor for Single Phase Operation

Saw with unique turret arm action and mechanical brake.

Model 33-891 12" Radial Saw with Low Voltage Control

Saw with low voltage control, magnetic starter, and transformer.

Specifications

Detailed technical specifications for the 12" Radial Saw models.

Deluxe 10" Radial Saw

Model 33-990 Deluxe 10" Radial Saw

Saw with capacitor start motor, automatic blade brake, and extra-large table.

Specifications

Detailed technical specifications for the Deluxe 10" Radial Saw.

Saw Fence Systems

Delta Unifence® Saw Guide

Extruded aluminum construction for protection and wear resistance.

Biesemeyer Commercial Fence System

Durable construction with Finland Birch and laminates for precision.

Specifications

Technical specifications for Unifence and Biesemeyer fence systems.

Saw Fence Systems

Biesemeyer T-Square® Home Shop Fence System

Rugged construction for years of use, available in 28", 40", 52" capacities.

Delta Precision Saw Guide

Aluminum body for corrosion resistance, choice of 29" or 50" rip capacities.

Specifications

Technical specifications for Biesemeyer T-Square and Delta Precision Saw Guide systems.

Moulding Cutterhead Knives and Accessories

Moulding Cutterhead Sets

Sets of cutterheads and knives for various Delta saws.

Tenoning Accessories

Accessories for cutting tenons and wood joints.

Roller Table and Roller Stands

Auxiliary supports for handling long and wide stock.

Blade Guards and Safety Accessories

Deluxe Uniguard® Blade Guard System

Blade guard with splitter and anti-kickback fingers for table saws.

Biesemeyer T-Square® BladeGuard System

Blade guard system compatible with Biesemeyer fence systems.

Miter Gages and Attachments

Miter gages and clamp attachments for precise angle cutting.

Circular Saw Accessories

Sliding table, outfeed tables, and spacer collars for circular saws.

Contractor's Saw, Tilting Arbor Saw, and Bench Saw Accessories

Contractor's Saw and Tilting Arbor Saw Accessories (cont'd)

Extension tables, guide bars, rip fences, and dust collection connectors.

Sidekick® 81/4" Builder's Saw® Accessories

Dado head table insert and steel stand.

10" Bench Saw Accessories

Extension kits and steel stands for bench saws.

General Table Saw Accessories

Books on saw usage and safety.

Saw Accessories for Various Saws

Sidekick® Saw Accessories

Table extensions, work clamps, drive belts, and dust bags for Sidekick saws.

Miter Saw and Slide Saw Accessories

Miter saw table systems and cut-off gang stops.

Radial Saw Accessories

Roller extension tables, shaping guards, and cutterhead return attachments.