Delta 46-700 - Table of Contents

TABLE OF CONTENTS
SAFETY RULES.3
ADDITIONAL SAFETY RULES FOR WOOD LATHES... ..4
UNPACKING AND CLEANING.....5
ASSEMBLING AND SETTING UP LATHE.5
CONNECTING LATHE TO POWER SOURCE
Power Connections. 8
Grounding Instructions ..........8
FASTENING LATHE TO SUPPORTING SURFACE.. ..9
OPERATING CONTROLS AND ADJUSTMENTS
Starting And Stopping Lathe..... 9
Locking Switch in The “OFF” Position ... 9
Spindle Speeds. 1 0
Repositioning Headstock For Outboard turning.10
Tool Rest........11
Tailstock. 1 1
Headstock Spur Center....... 12
Tailstock Cup Center........ 12
OPERATION
Lathe Tools. 1 3
How To Turn Spindles ....13
Centering The Work..........14
Mounting The Work.... 14
Tool Rest Position.. 15
Roughing A Cylinder.........15
Position of Hands. 1 6
Smoothing A Cylinder. 1 6
Using The Parting Tool.........16
Squaring An End... 1 7
Cutting A Shoulder. 1 7
Cutting Small Beads.. 18
Vee Grooves......... 18
Long Cuts...........19
Cove Cuts........ 19
Square Sections .. 2 0
Faceplate Turning. 2 1
Mounting Work To Faceplate....... 21
Inboard Faceplate Turning. 21
Outboard Faceplate Turning........22
Hollow Tailstock... 2 3
MAINTENANCE
Replacing Variable Speed Drive Belt ....24
AUTHORIZED SERVICE STATIONS. 2 6
PARTS, SERVICE OR WARRANTY ASSISTANCE .... .28
WARRANTY ..........28
2