Chapter 6 Writing a Program
6-15
To select several networks, press and hold the Ctrl key on the keyboard and click the networks. You can also
select a range of networks by pressing and holding Shift on the keyboard, clicking the first network within the
range, and then clicking the last network within the range.
Right-click an object after selecting it to show the context menu.
Item Function
Undo
Undo the last action.
You can undo up to 20 previous actions.
Redo You can redo an action that has been undone.
Cut Cut a device, block, or network.
Copy Copy a device, block, or network.
Paste Paste an object that has been copied or cut into the present position.
Paste right
Paste an object at the right side of the selected position.
The object is connected in series to the selected position.
Paste under
Paste an object under the selected position.
The object is connected in parallel to the selected position.
Delete Delete a device, block, or network.
Activate/Inactivate
Network
Activate or deactivate the selected network.
The deactivated network is ignored when you compile the program.
To Next Page
Loading...
Need help?
General
