Chapter 7 Memory Card
b. If you select
PC (DUP File)
, click , select a folder in the
Save in
list in the
Save As
dialog box,
and type a filename in the
File name
box. When you select the backup source for the ISPSoft
Project, set the PLC password. You can set the password to be the same as the Project password,
set a new PLC password, or not set a PLC password. If you do not set a password for the Project,
the PLC password is also not set. When you select
Setting new PLC password
, the wizard looks
like the following image. And you can set new PLC password and number of the attempt times.
(5)
After that you can see the summary. Make sure that the summary in the
CARD Utility
wizard is consistent
with the data backup you want to perform, and then click
Execute
.
To Next Page
Loading...
Need help?
General
