Delta AS16AP11P-A User Manual

AS Series Operation Manual
9-20
_9
3. Set up the IP address
 Double-click the listed MAC address for your device to open the Input Data dialog box.

Enter the IP address and click OK.
4. Disable DHCP/BOOTP
Click the device in the Mapping Table that you want to disable, then click Disable DHCP/BOOTP. The selected
device does not send DHCP/BOOTP requests. To change the IP address receiving mode, refer to Section 9.4.2.4
for more information.

Delta AS16AP11P-A Specifications

General

Brand	Delta
Model	AS16AP11P-A
Category	Control Unit
Language	English