Delta AS16AP11P-A User Manual

Chapter 1 Product Introduction
1-9
1_
Classification Model Name Description
AS-FCOPM
AS00SCM-A
+
AS-FEN02
For AS-FEN02 function cards
AS01DNET-A (RTU)
DeviceNet remote IO slave, its right side connectswith AS
Series extension modules, including digital modules, analog
modules, temperature modules, etc.
Function cards
AS-F232
Serial communication port, RS232, functioning as master or
slave
AS-F422
Serial communication port, RS422, functioning as master or
slave
AS-F485
Serial communication port, RS485, functioning as master or
slave
AS-FCOPM
CANopen communication port, supporting DS301, AS
series remote modules and Delta servo systems
AS-F2AD
2-channel analog input
0-10V (12 bits), 4-20mA (11 bits)
Conversion time: 3ms/channel
AS-F2DA
2-channel analog output
0-10V, 4-20mA (12 bits)
Conversion time: 2ms/channel
AS-FEN02
2x Ethernet ports, supporting MODBUS TCP, EtherNet/IP
Adapter, AS Series remote control, and DLR function
AS-FPFN02 2x Ethernet ports, supporting PROFINET Device (adapter)
Programming
cable
UC-PRG015-01A
(1.5M)
Used for the connection between a PLC and a PC via a mini
USB port, use for AS332T-A, AS332P-A, and AS324MT-A
UC-PRG030-01A (3M)
Use for the connection between a PLC and a PC with a mini
USB port, use for AS332T-A, AS332P-A, and AS324MT-A
UC-PRG030-20A (3M)
Use for the connection between a PLC and a PC with a
RJ45 port, use for AS332T-A, AS332P-A, AS324MT-A , AS-
FEN02 and AS-FPFN02
I/O extension UC-ET010-24B (1M)
MIL connector, 40Pin ↔ 40Pin, shielded, use for
AS32AM10N-A, AS32AN02T-A, AS64AM10N-A and

Delta AS16AP11P-A Specifications

General

Brand	Delta
Model	AS16AP11P-A
Category	Control Unit
Language	English