AS Series Operation Manual
9-22
◆ Double-click the device to open the Device Setting dialog box.
◆ Make changes to the items, such as IP address receiving modes and click OK to confirm the settings.
3. Download the settings from HWCONFIG
◆ Refer to Section 9.4.1.1 for more information.
4. Open EIP Builder.
◆ Refer to Section 9.4.1.1 for more information.
5. Open the IP Manager
◆ Refer to Section 9.4.2.2 for more information.
6. Open the IP setup page
◆ Refer to Section 9.4.2.2 for more information.
To Next Page
Loading...
Need help?
General
