Delta AS16AP11P-A User Manual

AS Series Operation Manual
12-16
_12
7044
The device length of the
communication
data in the USB exceeds the limit.
1. Check the communication setting in the master
and the slave.
2. Check the communication cable.
- H
7047
The device checksum for the
communication serial port of the USB is
incorrect.
1. Check the communication setting in the master
and the slave.
2. Check the communication cable.
- H
70B1
The device communication function
code in function card 1 is incorrect.
1. Check the communication setting in the master
and the slave.
2. Check the communication cable.
- H
70B2
The device communication address
used in function card 1 is incorrect.
1. Check the communication setting in the master
and the slave.
2. Check the communication cable.
- H
70B3
The device used in the function card 1
exceeds the device range.
1. Check the communication setting in the master
and the slave.
2. Check the communication cable.
- H
70B4
The device length of the
communication
data in function card 1 exceeds the
limit.
1. Check the communication setting in the master
and the slave.
2. Check the communication cable.
- H
70B7
The device checksum for the
communication serial port of function
card 1 is incorrect.
1. Check the communication setting in the master
and the slave.
2. Check the communication cable.
- H
70C1
The device communication function
code in function card 2 is incorrect.
1. Check the communication setting in the master
and the slave.
2. Check the communication cable.
- H
70C2
The device communication address
used in function card 2 is incorrect.
1. Check the communication setting in the master
and the slave.
2. Check the communication cable.
- H
70C3
The device used in function card 2
exceeds the device range.
1. Check the communication setting in the master
and the slave.
2. Check the communication cable.
- H
70C4
The device length of the
communication
data in function card 2 exceeds the
limit.
1. Check the communication setting in the master
and the slave.
2. Check the communication cable.
- H
70C7
The device checksum for the
communication serial port of function
card 2 is incorrect.
1. Check the communication setting in the master
and the slave.
2. Check the communication cable.
- H
7203 Invalid communication function code
1. Refer to the function codes defined by the
communication protocols.
2. Check if the product firmware and the software
used are the most updated versions.
3. Make a note of the operation procedures and
screenshots of the error windows and hand this
note to the company or the technicians from the
agents.
- H
8105
The contents of the program
downloaded are incorrect.
The program syntax is incorrect.
1. Download the program and parameters again.
2. Check the communication cable.
3. Save all the projects and compress the projects
into one compressed file and then hand this file
to the company or the technicians from the
agents.
- H

Delta AS16AP11P-A Specifications

General

Brand	Delta
Model	AS16AP11P-A
Category	Control Unit
Language	English