Chapter 2 Specifications and System Configuration
2-46
Functional specifications
Analog-to-digital
Centigrade (°C) Fahrenheit (°F) Input impedance
Rated input range
*1
Type J: -100°C~1200°C
Type K: -100°C~1,350°C
Type R: 0°C~1,750°C
Type S: 0°C~1,750°C
Type T: -150°C~400°C
Type E: -150°C~980°C
Type N: -150°C~1,300°C
Type J: -148°F~2,192°F
Type K: -148°F~2,462°F
Type R: 32°F~3,182°F
Type S: 32°F~3,182°F
Type T: -238°F~752°F
Type E: -238°F~1,796°F
Type N: -238°F~2,372°F
±100mV
Disconnection detection
*1: If the measured temperature exceeds the upper limit, it only shows the maximum value. If the
measured temperature is below the lower limit, it only shows the minimum value.